Not just a cleaner.
Protection for your grit.
Keeps ball dust and court grime from bonding into your grit — so your paddle stays cleaner and lasts longer.
More than cleaning. It’s prevention.
SPINX stops buildup from taking hold. It protects the surface so dust and grime can't settle in and bond — what lands sits loose, where a quick wipe lifts it off. It's designed to maintain the factory grit integrity. No scrubbing, no harsh chemicals.
Mesoporous structure
The patented nanotechnology SPINX is built on is structured with pores far smaller than any speck of dust or court grime.
Van der Waals forces
The weak grip dirt uses to hold on. It needs close contact, and the structure doesn’t give it any.
The result
Dirt sits loose instead of digging in. A damp cloth takes it off.
It doesn’t fill the texture or sit on top of it. That’s why it adds no measurable weight.
What it can’t do: nothing brings back grit that’s already worn away. Protect it while it’s still there.
One paddle, three ways to treat it. Three outcomes for your grit.
Your grit is engineered at the factory — the question is how long it lasts. Untreated, residue buries it. Abrasive cleaners grind it down. SPINX preserves it — match after match.
Made for pickleball carbon fiber surfaces.
Most paddle cleaners are household formulas in a smaller bottle. SPINX isn’t. It’s built on a patented nanotechnology proven on solar and architectural glass, then reformulated specifically for carbon fiber and Kevlar paddle faces. One surface. One problem.
What SPINX isn't.
We don't claim what we can't deliver.
It doesn’t add or restore grit.
It protects the factory grit you already have. Once texture is ground away, nothing rebuilds it — not us, not anyone.
It doesn’t change how your paddle plays.
No added weight, no added texture. It’s designed to maintain the factory surface, not modify it.
It’s prevention, not repair.
Best applied while your grit is still good — ideally on a new paddle. On a worn one it stops further buildup, but it can’t undo the wear.
Engineered green from the chemistry up.
Most paddle sprays mask a synthetic base with fragrance and solvents that off-gas as they dry. SPINX skipped all of it — water-based, three simple ingredients.
Water-based system
Purified water carries the active sol. Alcohol-free, so it won't dry your skin. No solvents off-gassing.
VOC (SGS-tested)
SGS-tested at 8 g/L — a fraction of the 100 g/L regulatory limit. Suitable for indoor and outdoor use.
Ingredients Transparency
A simple, water-based formula. No "proprietary blend" of unnamed actives.
Untreated vs. protected, after hours of play.
One paddle left bare, one protected with SPINX — after hours of play. On the protected face, buildup can't bond, so a quick wipe is all it takes: no abrasion, no harsh chemicals, grit preserved.
Stays cleaner, lasts longer · water-based · independently SGS-tested
And vs. the methods you're using now
| Attribute | SPINX | Carbon Eraser | Isopropyl Alcohol |
|---|---|---|---|
| Removes residue | ✓ | ✓ | ✓ |
| Preserves grit | ✓ | ✗ | ✗ |
| Carbon fiber & Kevlar safe | ✓ | ✓ | ✗ |
| No abrasion | ✓ | ✗ | ✓ |
| Water-based, low-VOC | ✓ | ✗ | ✗ |
What players ask before they switch.
How is this different from a paddle eraser?
An eraser uses physical abrasion (melamine foam) to remove residue that has already bonded to the paddle. Every use takes a tiny amount of carbon fiber surface with it. SPINX prevents the residue from bonding in the first place — protective, not corrective.
How often should I reapply?
Day 1 is the only long one: pre-clean, then apply — about two minutes, once. After that it's 30 seconds before your first game, roughly as long as your warm-up stretch, then a damp cloth after you play. Heavy dusty outdoor play? Spray a little more often. The 100mL bottle is months of supply per paddle.
Do I still need to wipe my paddle after playing with SPINX?
Yes — that's the design, not a workaround. Ball dust and court grime still land on your paddle; what SPINX stops is buildup bonding into the texture. What lands sits loose and lifts off with one damp microfiber pass. Your paddle isn't dirt-proof — it's bond-proof. No cleaners, no solvents, no abrasion.
Is it safe for carbon fiber and Kevlar faces?
Yes. The formula is engineered for composite paddle surfaces — including carbon fiber (T700, T800, Toray) and Kevlar/aramid faces. SPINX bonds at the surface micro-texture without affecting the underlying composite layup.
Is SPINX safe to use on Joola, Selkirk, Paddletek, and other premium paddles?
Yes. SPINX is engineered for composite pickleball paddle surfaces commonly used by leading manufacturers including Joola, Selkirk, Paddletek, Engage, Six Zero, and Onix. SPINX bonds at the surface micro-texture without altering the underlying carbon-fiber or Kevlar composite layup.
Does SPINX change how my paddle plays, or affect it for competition?
No. SPINX cleans and protects your paddle's factory surface — it's designed to maintain what the manufacturer built, not modify it. It adds no spin, no texture, and it's engineered to be weightless. Equipment rules vary by league and event, so for anything competitive, check your governing body's current rules.
Engineered for the edge.
Preserve your paddle's grit — match after match. One bottle, months of supply. Your paddle stays cleaner and lasts longer.
Get SPINX